FAQs (Frequently Asked Questions)
Q:
What are the .inf and .icm files on the set-up disk & CD-ROM? How do I install the drivers
(.inf and .icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user manual to
install the drivers. You computer may ask you for monitor drivers (.inf and Icm files) or a
driver disk when you first install your monitor. Follow the instructions to insert the driver
disk (either floppy or CD-ROM) included in this package. Monitor drivers (.inf and Icm files)
will be installed automatically.
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions.
You can select the desired resolution under Windows 95/98 with the 'Display properties/
Settings' control panel.
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OSD button, then select 'Reset' to recall all of the original factory
settings.
Q:
What is the Auto function?
A:
The
AUTO adjustment
key restores the optimal screen position, phase and clock settings
at the press of a single button – without the need to navigate through OSD menus and
control keys.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the AC power cord is connected to the Monitor.
Q:
Will the LCD monitor accept an Interlace signal?
A:
No If an Interlace signal is used, the screen displays both odd and even horizontal
scanning lines at the same time, thus distorting the picture.
Q:
What does the Refresh Rate mean for LCD?
file:///D|/My%20Documents/dfu/150E6FB/ENGLISH/150e6/SAFETY/saf_faq.htm (2 of 8)2005-05-27 9:26:41 AM
