Philips 14PV120 Service Manual Download

Page: 45 / 63

2-1-4

T6410MEN

Cleaning

Cleaning of Video Head

Clean the head with a head cleaning stick or chamois
cloth.

Procedure

1.Remove the top cabinet.

2.Put on a glove (thin type) to avoid touching the

upper and lower drum with your bare hand.

3.Put a few drops of 90% Isopropyl alcohol on the

head cleaning stick or on the chamois cloth and,
by slightly pressing it against the head tip, turn the
upper drum to the right and to the left.

Notes:

1.The video head surface is made of very hard

material, but since it is very thin, avoid cleaning it
vertically.

2.Wait for the cleaned part to dry thoroughly before

operating the unit.

3.Do not reuse a stained head cleaning stick or a

stained chamois cloth.

Cleaning of Audio Control Head

Clean the head with a cotton swab.

Procedure

1.Remove the top cabinet.

2.Dip the cotton swab in 90% isopropyl alcohol and

clean the audio control head. Be careful not to
damage the upper drum and other tape running
parts.

Notes:

1.Avoid cleaning the audio control head vertically.

2.Wait for the cleaned part to dry thoroughly before

operating the unit or damage may occur.

Do Not !

Cleaning Stick

Upper
Cylinder

Video Head

ACE Head

Summary of Contents for 14PV120
































































Search results

Summary of Contents for 14PV120

Reviews:

Related manuals for 14PV120

Brands by name

Popular brands

Philips 14PV120, Service Manual

Search results

Summary of Contents for 14PV120

Reviews:

Related manuals for 14PV120

Brands by name

Popular brands