8
Tips
ß
Poor reception or no picture
The proximity of mountains or high buildings can cause ghost pictures,
echoing or shadows. If this is the case, try tuning the picture using
FINE
TUNE
(p. 4).
Do you have the right system (p. 4)?
Check that the aerial plug or euro c o n n e c t o r plug is properly connected.
Check also that your aerial is capable of receiving broadcasts in this
frequency range (
UHF
or
VHF
).
Adjusting the picture
If the picture is out of focus, or if you are having difficulties finding the right
settings, select one of the Smart picture controls
( p. 2) and store it
using the
P E R S O N A L
setting (p.5).
In case of bad reception (fuzzy picture), set the
NOISE RED
to
ON
: p. 5.
The picture is in black and white
To read a video cassette, check that it is recorded in the same format as
that of the video recorder (
PAL
,
SECAM
or
NTSC
).
No sound
If certain programmes have a picture but no sound, this is because you do
not have the correct TV system (see p. 4).
Standby
When you switch on the set, if it remains
in standby mode and the
LOCKED
message is displayed, this means that the
LOCK
function is activated (p. 6).
The set switches automatically to standby if it re c e i ves no signals for a period
of 15 minu t e s .
When it is in standby mode, the set uses energy.To save electricity, we
advise you to switch it off using the on-off button.
Still having problems?
If the set breaks down, never try to repair it yourself. Consult your after-
sales service department instead.
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used
appliances and dismantle them after retrieving any materials that can be
used again (ask your dealer for further details).
