Philips 107S2 CM2300 Service Manual Download

Page: 7 / 41

107S2 CM23 GSIII

OSD Adjustments

ZOOM

ZOOM increases or decreases the size of the images on your screen.

To adjust the ZOOM follow the steps below.
1) Press the button on the monitor. The MAIN CONTROLS window

appears.
2) Press the --button until ZOOM is highlighted.

3) Press the button. The ZOOM window appears.

4) Press the or button to adjust ZOOM.
5) Press the button to confirm your selection and return to the MAIN

CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.

After returning to MAIN CONTROLS . . .

. . . to continue to ADJUST HORIZONTAL, press the button until

ADJUST HORIZONTAL is highlighted. Next, follow steps 3 - 7 under

ADJUST HORIZONTAL.
. . . to exit completely, press the button

ADJUST HORIZONTAL
ADJUST POSITION under ADJUST HORIZONTAL shifts the image on

your screen either to the left or right. Use this feature if your image does

not appear centered. ADJUST SIZE under ADJUST HORIZONTAL

expands or controls the image on your screen, pushing it out toward the

left and right sides or pulling it in toward the center.
1) Press the button on the monitor. The MAIN CONTROLS window

appears.
2) Press the button until ADJUST HORIZONTAL is highlighted.

Smart Help

3) Press the button. The ADJUST HORIZONTAL window appears.

ADJUST POSITION should be highlighted.

4) Press the or button to move the image to the left or right.

5) When the position is adjusted, press the button to return to MAIN

CONTROLS window, or press the to highlight ADJUST SIZE.

6) To adjust the horizontal size, press the or button.
7) When the size is adjusted, press the button to return to MAIN

CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.

After returning to MAIN CONTROLS . . .

. . . to continue to ADJUST VERTICAL, press the button until ADJUST

VERTICAL is highlighted. Next, start with step 3 under ADJUST

VERTICAL and follow the directions.
. . . to exit completely, press the button

ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on

your screen either up or down. Use this feature if your image does not

appear centered. ADJUST SIZE under ADJUST VERTICAL expands or

controls the image on your screen, pushing it out toward the top or

bottom or pulling it in toward the center.
1) Press the button on the monitor. The MAIN CONTROLS window

appears.

Smart Help

Go to cover page

Forward

Back

http://jdwxzlw.5d6d.com/?fromuser=华盛维修

家电维修资料网，免费下载各种维修资料

Summary of Contents for 107S2 CM2300










































Search results

Summary of Contents for 107S2 CM2300

Reviews:

Related manuals for 107S2 CM2300

Brands by name

Popular brands

Philips 107S2 CM2300, Service Manual

Search results

Summary of Contents for 107S2 CM2300

Reviews:

Related manuals for 107S2 CM2300

Brands by name

Popular brands