8
9
ENGLISH
Class II device, Type BF device (device with specific protection against electrical hazards).
DOUBLE INSULATED
Reference to standards
Electric safety standards IEC 60601-1
Electromagnetic compatibility according to IEC 60601-1-2
Technical specifications
Electricity supply
220V/60Hz. 1.2 Amp
Thermal overload protector
Resettable thermal fuse; functioning temperature 130 C°
Compressor max. pressure
268 kPa (2.68 bar)
Average flow rate
6 LPM 70 kPa (0.7 bar)
Max flow rate
10.7 LPM
Weight
2.0kg
Size
380mm x 170mm x 110mm
Noise level
58±3dBA
Technical specifications
Electricity supply
230V/50Hz. 1 Amp
Thermal overload protector
Resettable thermal fuse; functioning temperature 150 C°
Compressor max. pressure
360 kPa (3.6 bar)
Average flow rate
7 LPM 70 kPa (0.7 bar)
Max flow rate
9.8 LPM
Weight
2.2kg
Size
380mm x 170mm 110mm
Noise level
58±3dBA
Warranty
Respironics, Inc warrants the compressor to be free from defects in materials and workmanship under normal
use and operation for a period of
3
years from date of purchase from Respironics, Inc. The warranty is limited
to repair or replacement, at Respironics, Inc's sole option, of any such component or equipment claimed to be
defective when claim is shown to be bona fide by evaluation by Respironics, Inc. This warranty does not extend
to any components or equipment subjected to misuse, improper operation, accidental damage, or unauthorized
repairs, and is not extended to charges of, or for, labor repairs. All items returned must be properly packaged
and shipped, prepaid, by the product distributor servicing the unit. Respironics, Inc shall not be liable to
purchaser or others for loss of use of equipment or for indirect, or incidental or consequential damages that
might arise.
Symbol glossary
l
ON (power)
ATTENTION
Class II, double insulated
O
OFF (power)
~
Alternating current
Type BF applied parts
SN
Serial number
Separate collection
Indoor use only
Follow instructions for use
Manufacturer
Temperature limitation
Atmospheric pressure
Humidity
IP21 Housing Ingress Protection rate:
IP21 (protected from the penetration of solid bodies with dimensions greater than 12 mm.
Protected from the penetration of vertically falling water drops).
Ambient conditions
Storage conditions
Temperature
MIN -25 °C – MAX 70 °C (-13 °F – 158 °F)
Humidity
MIN 10% RH – MAX 95% RH
Operating conditions
Temperature
MIN 5 °C – MAX 40 °C (41 °F –104 °F)
Humidity
MIN 10% RH – MAX 95% RH
Operating atmospheric pressure
Performance may vary depending on altitude above sea level,
barometric pressure and temperature
