Philips AVENT SCD580, User Manual

Page: 9 / 156

2 In the lullaby options menu, you can select a lullaby from the list of pre-stored lullabies. You
can also select ‘Play all’ to play all pre-stored lullabies. With an audio appliance connected to
the baby unit, you can also choose ‘Aux’ and select a track.
3 You can set the lullaby timer for 5 to 20 minutes or you can choose to play lullabies
continuously. Press OK to confirm the timer setting. The lullaby symbol and the lullaby played
are shown on the display.
,
If you set the timer, the lullaby function switches off after the time set. If you choose play
continuously, switch off the lullaby function in the soothing menu or by pressing the
K
button
on the baby unit.
projector
This soothing feature allows you to switch on the projector on the baby unit and program the
duration of projection.
1 Select the projector feature and open the menu with projector options. (Fig. 15)
2 To access the projector options, point the arrow at the options field and press OK.
3 You can set the projector timer for 5 to 20 minutes or you can switch the projector on
continuously. Press OK to confirm. The projector symbol appears on the display (Fig. 16).
,
If you set the projector timer, the projector switches off automatically. If you switch on the
projector continuously, switch off the projector in the soothing menu or by pressing the
projector button on the baby unit.
volume
The volume can be set if the menu is not active. There are seven volume levels and a ‘volume off’
setting.
Setting the volume level
1 Press the + button or the - button once.
,
The current volume level appears on the display.
2 Press the + button to increase the volume or press the - button to decrease the volume.
,
If no button is pressed for more than 2 seconds, the volume level indication disappears and
the volume setting is saved.
volume off
Below the lowest volume setting, there is a ‘volume off’ setting.
1 Press the + button or the - button once.
,
The current volume level appears on the display.
2 Press and hold the - button for more than 2 seconds to set the volume to off.
,
The message ‘MUTE’ and the mute symbol appear on the display. Only the sound level lights
show that the baby produces sounds (Fig. 17).
talk function
1 If you want to comfort your baby, press TALK on the parent unit and talk clearly into the
microphone on the front from a distance of 15-30cm (0.5-1ft) (Fig. 18).
Note: If you have set the volume of the lullaby higher on the baby unit, the sound will also be louder
when you use the talk function on the parent unit.
2 Release TALK when you have finished talking.
EngliSh
9