philippi elektrische systeme gmbh
www.philippi-online.de
Neckaraue 19
D-71686 Remseck am Neckar
Telefon: +49 (0)7146/8744-0 Fax -22
k
A S S E M B L I N G M A N U A L K O A X 6 9 4
1. ASSEMBLING OF THE COUPLING PLUG HOUSING (SCREW COLLAR)
Coupling socket 9782 and coupling plug 9783: first you have to slip the high-strength cable gland which matches the cable diameter
and the screw collar over the cable.
2. ASSEMBLING OF THE COAXIAL CABLE PLUG
Hold the coaxial cable plug at the inner pen and unscrew the collar by turning counter clockwise. Slip the collar over the cable so that
the thread points in the direction of the cable end. Dismantle the cable according to the pictures below:
Put the cable in the plug and solder the inner wire
Slip the reduction socket over the dismatled cable as far
at the end of the inner pen. After that, the shield
as it will go. Turn the overlaping shield to the rear.
has to be soldered at the outer 4 holes as well.
Screw the reduction socket together with the cable into
the plug by twisting the plug. Solder the inner wire at the
Please pay attention, so that there is no
end of the inner pen and the shield at the 4 outer holes.
connection between inner and outer wire !
3. ASSEMBLING OF THE WATERTIGHT CONNECTORS
9782 – Coupling socket
Screw the longer side of the coax – connector
into the female insert. Snap the female insert into
the coupling ring and screw in the PL-plug incl.
the cable from behind.
Afterwards screw the shell into the coupling ring
and seize the high-strength cable gland.
9783 – Coupling plug
Screw the coupling ring into the shell.
Connect the coax connectors together. Then
connect the coupling socket or flange socket. At
last seize the high-strength cable gland.
9784 – Flange socket
Screw the longer side of the coax – connector
into the female insert. Snap the female insert into
the coupling ring and screw in the PL-plug incl.
the cable from behind.
4. CONNECTION OF PLUG AND SOCKET
Screw in the PL-plug of the coupling socket or flange socket. Then slip the coupling shell over and tighten the coupling ring to the
coupling socket or flange socket. At last seize the high-strength cable gland at the coupling plug shell.
.
DISPOSAL NOTE
Please take care of your local directives on waste electrical and electronic equipment.
Please use collection points for waste electrical and electronic equipment.
O - ring
O - ring
Coupling ring
Coupling ring
Housing
Female insert
Female insert
PL-plug
PL-plug
Shell
Shell
High-strength cable gland
High-strength cable gland
