Battery-Monitor BLS
REV 1A – APR 2019 - Software Version 1A
page 8
IMPORTANT: The monitor, the shunt and the charger must have the same negative potential, ie be
connected to a common minus point (battery negative).
4. Setup
To access the settings, please press the gear icon in the lower right corner of the main
screen
4.1 Access (PIN) to setup
Subsequently, the query of the PIN, which is "1234" in the
delivery state, appears.
After successful entry with subsequent confirmation
"OK" will take you to the settings menu.
The following settings can be made by pressing the respective
symbol:
1. Display settings
2. Battery Management settings
3. Charger settings
4. Alarm settings
4.2 Anzeige
After pressing the "Display" symbol, the adjacent image appears. The following settings can now be
made:
- Language
EN / FR / GB ...
- Brightness
max. 20 - 100%
- Brightness
Auto ON / OFF
- Auto stand by
OFF / x s / min.
- Change PIN
4.3 Batterie-Management
For proper operation, the following data must be set during commissioning:
