To Use the Timer
•
Once the target time has been set and loaded,
(e.g. 30 minutes) press the (S/S) button to start
the measurement (the digits will start running);
Press the (S/S) button once again to stop the
measurement (the digits will stop running.)
•
The elapsed time will be exhibited on the 2nd
row of display throughout the measurement.
How to Reload the Timer
•
To reload the timer display to original target
time prior to the timer counts to zero, press the
(L/R) button to reload the timer while the timer
is stopped
•
Or you may press the (L/R) button to reload
after the watch has counted to zero.
Timer Alarm Sound
•
During the counting the watch will beep once
when it comes to the last 10, 5, 1 minute(s) and
the last 5, 4, 3, 2, 1 second(s.)
•
When the timer reaches zero, the Watch will
sound a long beep.
COUNTDOWN TIMER MODE
16
Summary of Contents for Signature Digi Sport
Page 1: ...INSTRUCTION MANUAL WARRANTY ...
Page 6: ...MAJOR FUNCTION MODES 4 ...
Page 30: ...www PhilipStein com V 12 15 ...
