How to Measure Elapsed Time
•
During the “All Zero” Display, press the (S/S)
button once to start the counting, and press the
(S/S) button again to stop the counting.
•
The elapsed time between the above 2 key-stokes
will be exhibited on the 1st row of the display.
Repea t the above key operations to get the
accumulative elapsed time.
How to Get a Lap Time
•
When the chronograph is counting press the (L/R)
button to get and view the Lap Display.
•
In the Lap Display the current lap number and lap
time will appear on the 1st and 2nd row of the
display respectively.
•
Repeat the above key operations to get another
lap time.
How to Recall the Lap Time and Reset the
Chronograph
•
While the chronograph is stopped:
- Press the (L/R) button to recall the recorded lap times
one by one or you may Hold down the (L/R) button
for about 2 seconds to reset the chronograph.
NOTE: If the chronograph is reset , the lap time will be cleared at
the same time.
CHRONOGRAPH MODE
13
Summary of Contents for Signature Digi Sport
Page 1: ...INSTRUCTION MANUAL WARRANTY ...
Page 6: ...MAJOR FUNCTION MODES 4 ...
Page 30: ...www PhilipStein com V 12 15 ...
