3.
IDs are excluded.
SmartStart
1. Product has a DSK string, you can key
in first five digit to increment smart
start process, or you can scan QR
code.
Ex: mydsk
10209-46687-52248-13629-04783-
07465-15776-56519
2. SmartStart enabled products can be
added into a Z-Wave network by
scanning the Z-Wave QR Code
present on the product providing
SmartStart inclusion. No further
action is required and the SmartStart
product will be added automatically
within 10 minutes of minutes On in
the network vicinity.
Association
This machine provides a group of groups.
Each group can set 5 Nodes.
Group 1: Used for event return.
Report type:
1.Notification report
2.Sensor multilevel report
3.Reset report
Adding a node ID allocated by Z-Wave Controller means inclusion. Removing a node
ID allocated by Z-Wave Controller means exclusion.
Failed or success in including/excluding the node ID can be viewed from the Z-Wave
Controller.
LED Indication
To distinguish what mode the switch is in, view from the LED for identification.
State Type
LED Indication
No node ID
Under normal operation, when the Switch has not been allocated a node ID,
the LED flashes on and off alternately at 30 second intervals. By pressing
On/Off button, it will stop flashing temporarily.
Learning
When PAT12 is in learning mode, If the learning code is successful, the LED
will flash slowly.
Programming
2. Z-Wave’s Configuration
Configuration
Parameter
Function
Size
(Byte)
Value
Unit
Default
Description
1
Fixed timer for
report Co2
concentration
1
0-127
1
Units of 1 minutes.
2
Concentration
change report
1
0-100
10
Units of 1 %.
3
Baseline level 1 1
0-50
6
Units of 100 ppm.
4
Baseline level 2 1
0-50
8
Units of 100 ppm.
5
Baseline level 3 1
0-50
10
Units of 100 ppm.
6
Baseline level 4 1
0-50
12
Units of 100 ppm.
7
Baseline level 5 1
0-50
16
Units of 100 ppm.
2. Firmware update over the air (OTA)
PAT12
is based on 500 series SoC and supports Firmware Update Command
Class, it can receives the updated firmware image sent by controller via the Z-
wave RF media. It is a helpful and convenient way to improve some function if
needed.
Command Classes
2
