In Wall Roller shutter controller
PAN34
Introduction
The in-wall Roller Shutter Controller is designed to switch rise/lower roller shutter
connected to its terminals using radio waves, controllers and a push button directly
connected to this Roller Controller.
This in-wall Roller Shutter Controller is a Z-Wave Plus
TM
enabled wireless device fully
compatible with any Z-Wave
TM
enabled networks. This device is a security enabled Z-
Wave Plus product that uses encrypted Z-Wave Plus messages to communicate to
other security enabled Z-Wave Plus products. Z-Wave
TM
enabled devices displaying
the Z-Wave
TM
logo can also be used with this device regardless of the manufacturer.
This product can be operated in any Z-Wave network with other Z-Wave certified
devices from other manufacturer. Within the network it will act as repeater regardless
of vender to increase reliability of the network. Slim design let the Controller can
easily hide itself into the wall box and that will be good for the house decoration.
This device must be used in conjunction with a Security Enabled Z-Wave Controller
in order to fully utilize all functions. Its functionality and supported command classes
is identical when included as a secure and non-secure device.
The new smart relay calibration technology can reduce the inrush current caused by
the load and let the module work perfectly with many kind of Roller Shutter.
This in-wall Roller Shutter Controller is able to detect position of the Shutter by using
the patterned power measuring method, so it can be remote controlled not only fully
up or down, but also can be adjusted to ex. 30% or 50%. And when manual
controlled by push button, the controller also can memorize the position and send the
new shutter position to its controller (ex. IP-Gateway).
Safety Precautions and Installation
Avoid installing the unit in storming or raining weather.
Be sure to isolate or switch off power source before installing or maintenance.
Do ensure that the power supply circuit protected by a 16A circuit breaker or
suitable equivalent fuse.
IMPORTANT
Installation must be performed by skilled technicians who are informed about
the standards and technical requirements of the appliance and its proper
1
