PIR Sensor PSP06
The PIR sensor PSP06 has PIR, based on Z-Wave
TM
technology.
It is the Z-Wave
TM
plus product, it support the security, OTA... Those
newest features of the Z-Wave
TM
technology. Z-Wave
TM
is a wireless
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
TM
network
with other Z-Wave
TM
certified devices from other manufacturers and/or
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
TM
700 series chip, when your Z-Wave
TM
network system is all made by Z-Wave
TM
700 series devices. The
network system will have the advantages as below.
•
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
Specification
Power
3VDC (CR123A lithium battery)
Battery life
10 years
RF distance
Min. 40M indoor,
100M outdoor line of sight,
RF Frequency
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
RF Maximum Power
+10dBm (Peak), -10dBm (Average)
Location
indoor use only
Operation temperature -20
o
C ~ 50
o
C
Humidity
85%RH max
Dimension
82 x 25.3 x 23.2 mm
FCC ID
RHHPSP06
Specifications are subject to change and improvement without notice.
Indication of battery life : Alarm Report PIR:50 times/Day, Auto
Report:4 times/ Day, Auto Wake up:1 times/ Day.
Troubleshooting
Symptom
Cause of Failure
Recommendation
The device can not
join to Z-Wave™
network
The device may in a Z-
Wave™ network.
Exclude the device
then include again.
1
