1
PAN03
Switch Module with meter
Introduction
This plug-in ON/OFF switch PAN03 is a security enabled wireless switch, based on
Z-Wave Plus technology. Z-Wave Plus
TM
enabled devices displaying the Z-Wave
Plus
TM
logo can also be used with it regardless of the manufacturer, and can also be
used in other manufacturer’s Z-Wave
TM
enabled networks. Remote On/Off control of
the connected load is possible with other manufacturer’s wireless Controller. Each
switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to
ensure that the signal is received by its intended destination by routing the signal
around obstacles and radio dead spots. Because PAN03 supports Security Command
Class, it can learn with Secured controller. Its functionality and supported command
classes is identical when included as a secure and non-secure device.
This plug-in ON/OFF switch is able to detect instance wattage and overload current
(12A with resistive load) of connected lights or appliances. When detecting overload
state, the Switch will be disabled and its On/Off button will be lockout of which LED
will flash quickly. However, unplug and re-connect the switch will reset its overload
condition to normal status.
Safety Precautions and Installation
Avoid installing the unit in storming or raining weather.
Be sure to isolate or switch off power source before installing or maintenance.
Do ensure that the power supply circuit protected by a 16A circuit breaker or
suitable equivalent fuse.
IMPORTANT
Installation must be performed by skilled technicians who are informed about the
standards and technical requirements of the appliance and its proper
installation.
Check your local codes as they apply to your situation. If the house wiring is of
aluminum, consult with an electrician about proper wiring methods.
Before proceeding with the installation, TURN OFF THE POWER TO THE LIGHTING
CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX TO AVOID ELECTRICAL
SHOCK.
Specification
Operating Voltage
100 - 240VAC 50Hz/60Hz 11A
Maximum Load
11A (Resistive load)
Range
Minimum 40m indoor, 100m outdoor line of sight
Operating Temperature
0°C to 40°C
Humidity
Up to 85% max.
Storage Temperature
-20°C to 60°C
Location
Indoor use only
Frequency Range
PAN03-1: 868.40MHz; 869.85MHz(EU) /
PAN03-2: 908.40MHz; 916.00MHz(USA/Canada) /
PAN03-3: 920.90 MHz, 921.70 MHz, 923.10 MHz (Taiwan)
PAN03-IL: 916.00MHz(Israel)
RF Power
+5dBm
OTA
support
FCC ID
RHHPAN03
Dimensions
47.5 x 39 x16 mm
Wire
0.75mm², 18AWG
** Specifications are subject to change and improvement without notice.
