Using your Remote Control
Your infrared heating panel comes with a remote control for your
added convenience. The remote has four buttons which correspond
with the controls on the side of the heating panel.
To control your heater using your remote, aim the remote at the
temperature display window on the front of the heating panel.
• The
POWER
button turns the panel on/off.
• Press the remote
TEMPERATURE
button to increase the temperature
by 1°C. Press the button to decrease the temperature by 1°C.
Holding either button down continuously will increase or decrease
the temperature by 1°C every 0.5 seconds.
• The
LIGHT
button will turn the LED back lights on/off.
7
Operating your Infrared Heater
• Switch on the isolating switch (if present) turn on the power switch on the side of the panel.
• The temperature will be displayed in the LED window on the front of the heating panel.
• The Product can also be switched on and off using the remote control.
• When the product is first turned on, it will be on the factory default setting (factory default
setting is 85°C), users can set their preferred temperature later on.
• The highest temperature it can be set at is 85°C and the lowest setting is 45°C.
Every time you press the up arrow button on either the side of the panel or the remote
control the temperature will increase by 1°C.
Every time you press the down arrow button on the side of the panel or the remote
control the temperature will decrease by 1°C.
Holding either button down continuously will increase or decrease the temperature
by 1°C every 0.5 seconds.
• The LED back lights come on automatically when the power is switched on. Use the
Light
on/off
switch on the side of the panel or the remote to switch them on/off.
TEMPERATURE
POWER
LIGHT
