Customer Careline: 0901 293 0038
Calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary
Support: http://technical.philex.com
STEP ONE
WALL FITTING FOR WOOD STRUCTURE (eg STUD WALLING)
Due to the width of wooden beams within dividing walls, there is a limitation for the distance between wall mounting
screws. This LCD wall mount has two close wall mounting holes for this purpose. Fit three suitable wall screws to your
wall (please seek professional advise before obtaining and fitting wall screws - all walls differ!), leaving 2-3mm gap be-
tween the screw head and the wall surface. This allows the plate to slide onto the screws as shown below.
Once the bracket has been fitted you can tighten the wall screws to provide a secure fit.
WALL FITTING FOR CONCRETE/BRICK WALLS
Fit three suitable wall screws to your wall (please seek professional advise before obtaining and fitting wall screws - all
walls differ!), leaving 2-3mm gap between the screw head and the wall surface. This allows the plate to slide onto the
screws as shown below.
Once the bracket has been fitted you can tighten the wall screws to provide a secure fit.
