StarTech.com UNIRAILS1UB, Quick Start Manual

Page: 1 / 2

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: August 23, 2019 10:33 AM
Product Diagram (UNIRAILS1UB)
Component Function
1
Adjustable Depth Basic 1U
Universal Server Rail
• Used to securely mount equipment (1U in
height) in a Server Rack .
• Maximum Weight Capacity = 200 lb. (91.7 kg)
2 Front Bracket
• Used to secure the
Server Rail
to a
Server
Rack
.
3
Back Bracket
• Used to secure the
Server Rail
to a
Server
Rack
.
Requirements
For the latest requirements, please visit www.startech.com/UNIRAILS1UB
• Cage Nut Tool x 1 (Optional)
• Phillips Head Screwdriver x 1
4-Post 1U Universal Adjustable Mounting Depth Rack Rail
Package Contents
• Adjustable Depth Basic 1U Universal Server Rail x 2
• M6-12 Screws x 8
• Cage Nuts x 8
• M6 Plastic Cap Washers x 8
• Quick-Start Guide x 1
Installing the Server Rail
1. Insert the
Cage Nuts
x 4 into the
Cage Nut Holes
on the front and back
Rails
of the
Server Rack .
Note:
You can use a
Cage Nut Tool
to aid in the installation of the
Cage Nuts
.
2. Align the
Screw Hole
on the
Back Bracket
on the
Server Rail
with the
Cage Nuts
(inserted in step 1) on the back Rail on the Server Rack .
3. Slide an M6 Plastic Cap Washer over-top of the M6-12 Screw.
4. Insert an M6-12 Screw through the Server Rail Screw Hole and into the Cage Nut .
5. Insert a second M6-12 Screw through the bottom Washer and Server Rail Screw
Hole
and into the
Cage Nut
.
6. Using a
Phillips Head Screwdriver
tighten the
M6-12 Screws
, being careful not to
over-tighten.
7. Align the Screw Hole on the Front Bracket on the Server Rail with the Cage Nuts
(inserted in step 1) on the front
Rail
on the
Server Rack
.
8. Slide an
M6 Plastic Cap Washer
over-top of the
M6-12 Screw.
9. Insert an
M6-12 Screw
through the
Server Rail Screw Hole
and into the
Cage Nut
.
10. Insert a second
M6-12 Screw
through the bottom
Washer
and
Server Rail Screw
Hole and into the Cage Nut .
11. Using a Phillips Head Screwdriver tighten the M6-12 Screws , being careful not to
over-tighten.
12. Repeat Steps 1 - 11 to install the second
Server Rail
.
2
3
1