background image

Dernier enregistrement 16/06/2008- 9:35  

1

 

 
 
 
 
 
 
 
6.  Security 

 
 

MAKE SURE THAT THE PLUG-CAP IS SCREWED IN WELL BEFORE PUTTING THE BOAT  
ON THE WATER  

 

 
It is the owner’s responsibility to ensure that the boat is equipped with all of the mandatory safety 
equipment, and that this equipment is easily accessible while sailing if it should be needed. The 
standards can vary according to the country of registration. 
 

 

On ground or on the water, always keep far away from electric wires. The contact of 
the mast with electric wire can involve serious injuries, even death. 

 

 

NEVER

 navigate under the influence of alcohol or drugs. 

 

  Always sail under comfortable conditions in which you feel at ease and in security. 

Never 

sail under conditions exceeding your competences.

 Consult the marine weather 

conditions before leaving. 

 

  Everyone on board

 must wear a life jacket at all times. 

 

  If you fall overboard, stay in contact with the boat, even if it capsizes. A boat drifts faster 

than a person can swim. 

 

  Wear appropriate clothing. Wear a dry suit or a neoprene wet suit in cold waters or if it is 

cold. Protect yourself from the sun and heat. 

Hydrate yourself. (Don’t forget to drink)

 

 

  Learn the priorities at sea, if you have a doubt, let the others go by first.  

 
 

  When you are not sailing, 

always direct the nose of the boat towards the wind, 

whether 

you are on the beach or at sea. 

 

  Read this manual carefully. 

 

 

 

Make sure that everyone has read and understood these security rules

 

 
 
 
 
 
 
 
 
 

Summary of Contents for OPEN 5.00

























Reviews: