Phileas OPEN 5.00, Owner'S Manual, Page: 14 / 24

Spinnaker halyard
Leave one end of the spinnaker halyard in front
of the boat ( the HEAD)
With the other end :
-
Go through the pulley situated just in
front of the mast foot.
-
Then, through the spinnaker pole
control pulley #348
-
Back to the keel case going through the
starboard hole under the foot of mast,
then into the block A
-
through the flying pulley #348 on elastic
(on the becket located along the keel
case, porthole)
-
then, through the pulley #348 to be
located at the central fixing of the
starboard foot strap,
-
then into the pulley located on the front
of jib rail ( B)
-
and returns into the snuffer bag before
coming out of the mouth of the trumpet
(it is advised to use the stick to carry out
this passage).
This same spinnaker halyard end will be used
to enter the spinnaker.
For this it goes through the eyelet situated on
the bottom of the spinnaker, then through the
second eyelet of the patch and is held in place
by a single knot.
Note: The spinnaker halyard may appear to be
a bit too short because of the sunken position
of the boom when the boat is on its trailer.
348