Philco PWM 641, User Manual

Page: 30 / 48

Requires for positions
Horizontal adjustment:
The slant angle should be less than 1 degree.
Power outlet
The distance between any side of washer and
power outlet should be within 1.5 meters.
Don't use too many electrical appliances
in one outlet.
Environment cleaning
It's necessary to clean the wall, door and ground.
Drain pipe
Wash tub
Install the washer on a hard and steady
ground with floor drain rather
than soft blanket or wooden floor.
Don't put dirty clothes or some other goods on a washer's head cover,
otherwise it may impact the normal operation.
Notice
Power connection
1. Don't use the wiring board or something like that.
2. If the power lines are damaged, please contact professionals to repair.
3.After the use of washer, pull the plug and turn the tap off.
4.Connect the washer with grounded outlet to correspond to the wiring
principles.
5.Place the washer in which is easy to connect the outlet.
Contact the maintenance center and ask professionals to repair the
washer. Laypeople may cause damages and troubles on the washer.
Don't put the washer in the place where the temperature is below zero.
The pipes will be frozen and break. Moreover, the temperature below
zero will damage the programming controller.
If move the washer in an environment whose temperature is below
zero, please keep the washer at room temperature for a few hours
before starting it.
Grounding introduction
A washer must have the grounding devices. If a trouble happens, the
device can reduce the risk of electrical shock. The device is equipped
with a cable (including a wire and a grounded plug). The grounded plug
must be inserted in an appropriate outlet. If you want to know if the
washer is grounded correctly, please contact with professional
maintenance staff. If the plug can't match with the outlet, please don't
change the plug by yourself.
Once your washer smokes or emits an odor, please cut the power and
contact with professional maintenance staff.