3
5. This hood could be wall-mounted or built-under kitchen cabinet.
6. 6-inch diameter exhaust duct is recommended to use in order to
maximize suction efficiency. In case of 5-inch exhaust duct, an adapter
is enclosed. To increase the efficiency of hood, the length of exhaust
duct should be minimized, and avoid acute turns.
7. Check the voltage on the rating label which should match the national
or local code.
. The air must not be discharged into a flue that is used for exhausting
fumes from appliances burning gas or other fuels (not applicable to
appliances that only discharge the air back into the room ), regulations
concerning the discharge of air have to be fulfilled.
4.
The installation height is measured vertically from the bottom of hood
to the top of stove, the minimum distance between the supporting
surface for the cooking vessels on the hob and the lowest part of the
range hood. When the range hood is located above a gas appiliance,
this distance shall be at least 650mm and the best recommended
height is 650-800mm, avoid left-right or up-down inclination.
MAIN FUNCTION:
OPERATION:
ELECTRONIC CONTROL AUTOMATIC CLEANING PROGRAMME:
1. Carefully add water-detergent solution through the water inlet by the
provided jar, Press
for a manually cleaning programme which
takes only 15 seconds to complete.
2. 4-fan speed control to suit different types of cooking.
3. The inner exhaust chamber is coated with easy cleaning layer
resulting in a more efficient cleaning.
4. The newly designed oil collecting device in 15
effectively drain the
oil and water entirely. Efficient centrifugal impeller to separate oil and
smoke.
5.
The machine is matched with a water injection kettle. Inject water
well before cleaning. There is a hole over oil cup, it indicates when
the water is full.
1.
Button
Press once for lamp on and second for off.
Hanging Bracket
Insert the screw
Unscrew the screws
then pull up to the
end and lock tightly
Align the Hanging
Bracket holes mounting
the hood on the wall
Wall
2
3
Oil Cup
Grille
Cabinet
Mount the hood
Insert the screw
Rlease the bottom
damper and screw it
tightly
Lamp
Bottom damper
Electrical switch
Water inlet
Wall Mounting Instruction
Built-under Instruction
