Instruction Manual and Installation Instructions
Electronic Control Auto Washing Range Hood Series
cn
en
ENVIRONMENT OF OPERATION:
INSTALLATION:
This appliance is designed for home or indoor environment
use.
1. The installation should be carried out by a qualified technician.
2. Air ventilation inside kitchen must be maintained in good condition
when cooker hood is used.
3. Do not put flame on the range hood. Please turn on hood before
turning on the hob.
4. Repair service including replacement of main cord should only be
carried out by a qualified electrician.
5. Cleaning process should follow the instructions as stated in this
manual, could not change or move parts against instruction to avoid
danger or damage.
6. In case of lamp broken, please disconnect the power before change.
Release the whole bottom damper to change the old lamp. Maximum
power is 40W lamp.
7. Just use normal tap water to fill the water tank.
. In case of changes in technical specification, there would be no prior
notice.
1. Unpack the carton.
2. Detached the fan grille by removing the screws, then take polyform
out from inside and reinstalled grille.
and not for
commercial
8. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
9
This appliance must be earthed. Installation must be carried out
only when power supply is disconnected.
PRECAUTIONS:
Please read this instruction manual carefully before installation.
During the installation, power supply must be disconnected.
PRECAUTIONS:
Please read this instruction manual carefully before installation.
During the installation, power supply must be disconnected.
1
PWE28S
PWE28W
