7
DOOR SECURITY indicator light
The “
Door Security
” indicator light is illuminated when the door is fully closed and the machine is ON.
When "
Start/Pause
" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the “
Door Security
” light has gone out
before opening the door. At the end of the cycle turn the programme selector to "
OFF
" .
B
NOTE: When the "Start/Pause" button has been pressed,
the appliance can take few seconds before it starts
working.
START/PAUSE button
When a programme is selecting, wait for the “STOP” indicator
light to flash before pressing the "Start/Pause" button.
Press to start the selected cycle (according to the selected cycle one indicator lights will go on) .
Changing the settings after the programmes has started (PAUSE)
The programme may be paused at any time during the wash cycle by holding down the
"
Start/Pause
" button for about two seconds. When the machine is in the paused mode, the
indicator light "
processing
" and option buttons will flash.
To restart the programme, press the "
Start/Pause
" button once again.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "
Start/Pause
" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme the programme selector should be rotated to the "
OFF
" position.
C
Door handle
Press the finger-bar inside the door handle to open the door.
IMPORTANT:
A SPECIAL SAFETY DEVICE PREVENTS THE DOOR FROM OPENING AT THE END
OF THE WASH/SPIN CYCLE. AT THE END OF THE SPIN PHASE WAIT UP TO 2
MINUTES BEFORE OPENING THE DOOR.
A
