Philco PW6608, User Manual

Page: 8 / 24

8
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary function
selection will remain active.
For example: If you want to select pre-wash
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see
“Program Selection Table”)
Ř3UHZDVK
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time. Pre-wash
without detergent is recommended for lace
and curtains.
Ř5LQVH+ROG
If you are not going to unload your clothes
immediately after the programme completes,
you may use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when there
is no water in the machine. Press Start / Pause
button after this process if you want to drain the
water without spinning your laundry. Programme
will resume and complete after draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause
button.The programme resumes. Water is
drained, laundry is spun and the programme is
completed.
Ř1R6SLQ
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
Ř4XLFN
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
'HOD\HG6WDUW
(In some models only)
With the Delayed Start function the
startup of the programme may be delayed
up to 3, 6 or 9 hours.
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
1.
Open the loading door, place the laundry and
put detergent, etc.
2. Select the washing programme, temperature,
spin speed and, if required, the auxiliary functions.
3. Set the desired time by pressing the Delayed
Start button. When the button is pressed once,
3 hours delayed start is selected. When the
same button is pressed again, 6 hours delay is
selected, and when it is pressed for the third time,
9 hours delayed start is selected. If you press the
Delayed Start button once again, Delayed Start
function will be canceled.
4. Press Start / Pause button. Previous delayed start
time light turns off and next delayed start time
light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights
will turn off and the selected programme will start.
6WDUWLQJWKH3URJUDPPH
3URJUHVVLQJDSURJUDPPH
Progress of a running program is shown through the
program follow-up indicator. At the beginning of every
program step, the relevant indicator lamp will light up
and light of the completed step will turn off.
If the machine is not spinning, the program may be
in rinse hold mode or the automatic spin correction
system has been activated because of excessive
unbalanced distribution of laundry in the machine.
&KDQJLQJWKHVHOHFWLRQVDIWHUWKH
SURJUDPPHKDVVWDUWHG
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the
programme will turn on.
If no programme is started or no key is pressed within
1minute during programme selection process, the
machine will switch to Pause mode and the illumination
indicators will turn off.Once the Programme Selection
lights and indicators will turn on again.
level of the temperature,speed and loading door
indicator lights will decrease.Other indicator lights and
knob is rotated or any button is pressed, indicator
6ZLWFKLQJWKHPDFKLQHWRSDXVHPRGH
Press the Start / Pause button to switch the machine to
pause mode while a programme is running. The light
of the step which the machine is in starts flashing in
the Programme Follow-up indicator to show that the
machine has been switched to the pause mode.
Also, when the loading door is ready to be opened,
Loading Door light will also illuminate continuously in
addition to the programme step light.