Philco PTL 1772 EBI, User Manual

Page: 14 / 84

Copyright © 2020, Fast ČR, a. s. Revision 10/2020
EN - 12
Fridge Temperature Settings
• The initial temperature of the Setting Display is 5 °C.
• Press fridge setting button once.
• Every time you press the button, the setting temperature will increase. (2 °C, 4 °C, 5 °C, 6 °C, 8 °C, super
cooling)
• If you press fridge setting button until super cooling symbol is displayed on your fridge Settings Display
and you do not press any button within the following 3 seconds, Super cooling will blink.
• If you keep on pressing, it will restart from last value.
Warnings About Temperature Adjustments
• Do not pass to another adjustment before completing an adjustment.
• Temperature adjustments should be made according to the frequency of door openings, the quantity of
food kept inside the fridge and ambient temperature of the place of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient temperature without
interruption after being plugged in to be completely cooled.
• Do not open doors of your fridge frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your fridge, when you
take the plug off and then plug it on again to operate it or when an energy breakdown occurs. Your
fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards,
according to the climate class stated in the information label. We do not recommend operating your
fridge out of stated temperatures value limits in terms of cooling effectiveness.
• This appliance is designed for use at an ambient temperature within the 10 °C-38 °C range.
Climate class Abbient temperature (°C)
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)