Philco PTF 802, User Manual, Page: 12 / 64

EN - 10
07/2013 Copyright © 2013, Fast ČR, a. s.
PART 4: SETTING THE TEMPERATURE
Insert the power plug into a power socket. Make sure that the power socket is properly grounded and that the
voltage in the power socket corresponds to the voltage specifi ed on the rating label of the appliance.
The temperature control dial is located in the top part of the appliance.
The freezer‘s thermostat automatically regulates the temperature inside the freezer.
MIN
MAX
NORMAL
Position „Min“ – minimum freezing
Position „Normal“ – normal, medium freezing, recommended setting.
Position „Max“ – maximum freezing
Do not forget, that the temperature inside the freezer compartment is also aff ected by ambient temperature,
the temperature of the food placed inside and the number of times the door is opened. Change the temperature
setting depending on your needs.
NOTE:
You can adjust the regulator to „MAX“ position if you need your food to be frozen much faster. However,
you must set it back to „Normal“ position after 36 hours, otherwise it will cause unnecessary energy
consumption and waste your money.
PART 4: SETTING THE TEMPERATURE