Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 22
Defrost
• Power off the refrigerator.
• Remove the food from the refrigerator and place it properly to prevent food from melting.
• Clear the drain pipe (to use soft materials to prevent damage to the liner). Prepare the water containers for
defrosting.
(Pay attention to clean the compressor compartment water draining tray. Avoding overflow to the
ground).
• You can use the natural temperature for the natural defrost, you can also use the ice shovel to eliminate
the frost (to use plastic or wooden ice shovel, for avoding damage to the liner or pipe)
• You can also use the appropriate amount of hot water to speed up the defrost, with a dry towel to dry the
water after defrosting.
• After defrosting, put back the foods in cabinet, and power on the refrigerator.
Stop using
• Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for
several hours; during the power failure, the times of door opening shall be reduced, and no more fresh
food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to
prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable
holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and seal
them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated;
the inclination during movement shall be no more than 45°.Do not hold the door and hinge when moving
this unit.
The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be
interrupted; or otherwise the service life may be impaired.
