EN - 11
12/2015
Copyright © 2015, Fast ČR, a. s.
2. Connect it to a wash basin sink.
M
ax. 100 cm
M
in. 60 cm
M
ax. 100 cm
M
in. 60 cm
Position the drain hose correctly so that the fl oor is not damaged by a potential water leak.
NOTE:
If the washing machine has a drain hose holder, install it according to the following picture.
Fast
ening
strap
Spout
Hose holder
Max. 100 cm
Min. 60 cm
M
in. 60 cm M
ax.
100 cm
–
When installing the drain hose, you
may use rope to secure it in place.
–
Position the drain hose correctly so that
the fl oor is not damaged by a potential
water leak.
–
If the drain hose is too long, do connect
it to the washing machine as it could
cause abnormal noise.
Electrical connection
–
When the heating function is used, the maximum current draw of this appliance is 10 A, so make sure that
the power source (current, voltage and wiring) in your home meets standard requirements for the load of
such an electrical appliance.
–
Insert the plug into a power socket that is properly installed and grounded.
–
Make sure that the voltage in your home corresponds to the information shown on the rating label of your
appliance.
–
The plug must correspond to the power socket and the cover must be properly and eff ectively grounded.
–
Do not use multi power adapters or sockets, e.g. extension cords.
–
Do not touch the power socket or power cord with wet hands.
–
When connecting or disconnecting the power plug, always fi rmly hold the plug and not the extension cord.
Do not forcefully pull on the power cord.
