EN - 12
01/2011
Copyright © 2011, Fast ČR, a. s.
Ending a program
•
After the completion of a selected program the washing machine will automatically stop.
•
The end of program indicator light will turn on.
•
Turn the program selector by turning it to O (off ).
•
The door will unblock itself about two minutes after the end of the program. Open the door by pulling on
the door handle towards yourself and take the laundry out of the washing machine.
•
After taking the laundry out of the washing machine, leave the door open so that the washing machine
can dry out.
•
Disconnect the washing machine from the power socket.
•
Shut off the water inlet.
WARNING!
If at any washing stage the washing machine is turned off and then on again, the washing machine
will activated the program in the place where it was interrupted. This will not damage the washing
machine in any way.
Child safety lock
The child safety lock is designed to prevent a program from being changed by a button being pressed during a
wash. The child lock is activated by simultaneously pressing the fi rst and third function buttons on the control
panel and holding them down for at least 3 seconds. After it has been activated the LED indicator lights will
fl ash on the function buttons indicating that the child lock is on. Deactivate the child lock by pressing the same
buttons (the fi rst and third) and holding them down for at least 3 seconds. The LED indicator light on the Start/
pause button will fl ash to indicate that the lock has been turned off .
WARNING!
After the child lock is turned on the washing machine will disable the program selector, spinning
speed knob and the function buttons.
