Philco PLD 1261-5TL, User Manual

Page: 16 / 24

Water supply pressure Minimum
Maximum 0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum Load Cotton 6 kg
Energy Efficiency Class A+
Spin Speed Maximum 1200 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
Introduction
The start of the appliance does not occur or
it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the
Authorised Service Centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
• - The appliance does not fill with
water properly.
• - The appliance does not drain the
water.
• - The appliance lid or drum doors
are open or not closed correctly. Please
check both!
• - The mains supply is unstable.
Wait until the mains supply is stable.
• - The appliance drum doors are
open or not closed correctly. Please
close drum doors !
WARNING! Deactivate the
appliance before you do the
checks.
Possible failures
Problem Possible solution
The programme does not
start. • Make sure that the mains plug is connected to the mains sock-
et.
• Make sure that the appliance lid is closed.
• Make sure that there is not a damaged fuse in the fuse box.
• Make sure that the Start/Pause has been pressed.
• If the delay start is set, cancel the setting or wait for the end of
countdown.
• Deactivate the Child Lock function if it is on (if available).
16