Philco PLD 1261-5TL, User Manual

Page: 11 / 24

To cancel the Delay Start option:
a. Press the button to set the
appliance to pause. The indicator of
button flashes.
b. Press the button Delay Start until
the display shows
' .
Press the button again to start
the programme immediately.
Changing the options
You can change only some option before
they operate.
1. Press the button . The indicator
flashes.
2. Change the options.
3. Press the button . The programme
continues.
Opening the lid
While a programme operates or the delay
start operates, the appliance lid is locked.
CAUTION! If the temperature
and level of the water in the
drum are too high, you cannot
open the lid.
Open the lid during the first 10 minutes
of the cycle and when the delay start
operates:
1.
Press the button to pause the
appliance.
2. Wait a couple of minutes and then you
can open a lid.
3. Close the lid and press button again.
The programme (or the delay start)
continues.
Open the lid when the programme
operates:
1.
Turn the programme knob to position
Vyp to deactivate the appliance.
2. Wait for some minutes and then open
the appliance lid.
3. Close the lid and set the programme
again.
Cancelling a running
programme
1. Turn the programme knob to position
Vyp to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
At the end of the programme
• The appliance stops automatically. The
acoustic signal operates (if it is
activated).
• The indicator of the button goes off
and in the display comes on.
• After a couple of minutes the door lock
indicator goes off.
• You can open the lid.
• Remove the laundry from the appliance.
Make sure that the drum is empty. Close
the water tap.
• Turn the programme knob to position
Vyp to deactivate the appliance. Unplug
the appliance.
• Keep the lid ajar, to prevent the mildew
and odours.
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The indicator of button flashes. The
lid stays locked.
• You must drain the water to open the lid.
11