Philco PLD 1061M, User Manual

Page: 17 / 26

EN - 15
07/2014 Copyright © 2014, Fast ČR, a. s.
Cleaning the infl ow fi lter
The water supply fi lter needs to be cleaned if there is no water or an insuffi cient amount of water after opening
the water tap.
Clean out the tap fi lter.
1. Shut off the water inlet.
2. Start a washing program excluding washing or draining.
3. Press the Start/Pause button and let the program run for approx. 40 seconds.
4. Disconnect the water supply hose from the tap.
5. Take out the fi lter and rinse it with water.
6. Reconnect the water supply hose to the tap.
Cleaning the washing machine fi lter
1. Disconnect the water supply hose from the rear side of the washing machine.
2. Use tweezers to pull out the fi lter, rinse it with water and reinstall it.
3. Reconnect the water supply hose to the tap.
4. Open the water supply making sure that water is not leaking anywhere.
5. Shut off the water inlet.
NOTES:
It generally applies that the tap fi lter is cleaned fi rst and then the washing machine fi lter is washed
subsequently. If you clean the washing machine fi lter fi rst, then it will be necessary to repeat steps 1-3 for
cleaning the tap fi lter.
WARNING!
Disconnect the power plug from the power socket before cleaning.
After fi nishing using the washing machine, disconnect the power cord from the power socket and
close the washing machine door to prevent children from playing with the washing machine.