Philco PHWK 2040, User Manual

Page: 9 / 52

EN - 7
09/2017 Copyright © 2017, Fast ČR, a. s.
9. Turn off model:
- ON/OFF and keep-warm combine as one button, press one time to turns into heating model; Press
one time again to turns into keep-warm model; Press one time again to turns into off status, while
electricity is off and display, 2 LEDs are all off ;
- Plug the kettle onto power, display shows “100”, Display turns off automatically after 15 minutes there
is no operation;
10. There is beep signal during operation, when plug onto the power, there will be a long beep signal, press
any buttons, there will be a short beep signal, after the boiling fi nished, there will be three long beep
signal.
11. Lift the kettle from the base, and you can pour out the water into container.
PART 6: CLEANING
– To prolong the kettle’s life, please clean the mineral deposits in the kettle regularly.
– Always unplug from the plug socket and allow to cool down before cleaning.
– Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle, as these will scratch
the surface and fade the outside color.
Cleaning methods:
1. Fill the kettle with 0.5L white vinegar and the remainder with water and allow to stand for over 1 hours;
2. Empty the solution from the kettle. Wipe off the deposits remained with damp cloth;
3. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will be ready
to use;
4. If necessary, repeat the operations above for several times;
5. The surface of the kettle may be wiped over with a damp cloth and polished with a soft dry cloth;
6. Grasp the top of the scale fi lter and pull upwards to remove. Wash with clean water and dry thoroughly
before replacing in the kettle.