Philco PHJE 5020, User Manual

Page: 9 / 60

7 Revision 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
6) Insert ingredients into the hopper (9) only when the screw is turning.
7) Gradually add pre-cut pieces and gently push them in using the pusher (11).
Do not push too hard on the pusher to avoid stopping the rotation of the screw.
The slower that ingredients are processed, the greater will be the fi nal amount of juice.
8) Never insert your fi ngers or other items into the hopper.
9) While working, regularly check whether the strainer (6) is clogged by pulp. If necessary, take the strainer
out and clean it. Follow the above described safety measures!
10) Regularly check the fi ll level of the pulp container (1). If the container starts fi lling up, turn the appliance off,
pull out the power plug and empty out the container.
Important notices:
Maximum time of non-stop operation is approximately 30 minutes with a subsequent break of 10 - 15 minutes.
After processing 1 kg of solid and fi brous food (citruses, pineapple, ginger, etc.) disassemble and clean out the
appliance.
Not following these instructions may result in the screw jamming and subsequent complicated cleaning of the
appliance.
Self cleaning function
If you need to clean the appliance before processing a different type of food, use the self cleaning function.
1) Turn on the appliance and pour a glass of water into the hopper (9). The majority of the pulp will be fl ushed
out.
2) Turn off the appliance and clean out the pulp container (1) and the juice jug (12).
3) This self cleaning does not replace the complete clean up, which must be performed every time that the
appliance is used (see chapter “CLEANING AND MAINTENANCE”).