Philco PHD 647, User Manual

Page: 8 / 60

EN - 6
06/2012 Copyright © 2012, Fast ČR, a. s.
Hot hotplate indicator light
The hot hotplate indicator light will be lit if the temperature of the hotplate is too high and could cause skin burns.
After a hotplate is turned off the display of the given hotplate will show "H" and this symbol will stay lit until the
temperature of the hotplate falls to a safe level.
Automatic shut off of hotplates
Each hotplate will be turned off after a defi ned maximum operating time unless the temperature is changed.
Each time the hotplate temperature is changed, the maximum operating time is set to the initial value of the
respective temperature setting. The maximum operating time depends on the selected temperature.
Setting the temperature Automatic shut-off of the hotplate after
1-2 6 hours
3-4 5 hours
5 4 hours
6-9 1.5 hours
Child Safety Lock
After turning on the appliance you will be able to activate the child safety lock. To turn on the child safety lock,
press the front right hotplate button and the reduce temperature button at the same time and then press
the front right hotplate button again. The "L" symbol (LOCKED = locked) will appear on the displays of all the
hotplates and it will not be possible to use the control panel. (If the hotplate is dangerously hot, the display will
intermittently show the symbols "L" and "H".)
The appliance will remain locked until you cancel the lock function. This applies even if you turn the appliance
off and on.
To cancel the child safety lock function, fi rst turn on the appliance. Press the front right hotplate button and
the reduce temperature button at the same time and then press the reduce temperature button again.
The "L" symbol will disappear from the display and the appliance will turn itself off .
Timer function (*optional)
There are two timer versions:
Minute timer (1.99 min):
The minute timer can be used even when the hotplates are turned off . The display will show "00" with a fl ashing dot.
Press the timer setting button to increase the time or press the button to reduce the time. Set the time in
the range from 0 to 99 minutes. If you do not press any button for 10 seconds, the minute timer will set itself
automatically and the fl ashing dot will disappear. After the timer is set, the set time will countdown.