Philco PEW 6712, User Manual

Page: 10 / 64

EN - 8
04/2012 Copyright © 2012, Fast ČR, a. s.
WARNING!
When drilling the mounting holes used for hanging the range hood, ensure the holes have the
correct diameter. If the holes are drilled incorrectly, then the correct assembly of the range hood
will not be possible.
4) Inserting dowels
Into the drilled holes A, B and C with a diameter of 8 mm, insert dowels with a diameter of 8 mm. Into the
two holes with a diameter of 6 mm, insert dowels with a diameter of 6 mm – see illustration below.
5) Attaching the chimney plate
Drill holes into the wall using a drill bit with a diameter of 6 mm. Attach the chimney plate by screwing 3.9
x 22 screws into the plastic dowels with a diameter of 6 mm.
Into the drilled holes A, B with a diameter of 8 mm, with the dowels inserted, screw in two 5.5 x 45 screws.
The distance between the wall and the head of the screw must be 5 mm.
A A B