Copyright © 2018, Fast ČR, a. s.
Revision 08/2018
EN - 10
• The lower chimney bracket is used to fi x the upper chimney and lower chimney. Use 2pcs 4×8mm screws
to attach lower and upper chimney.
Noted: Do not fasten screws too strongly, make sure that the upper chimney can be telescopically adjusted
after assembling.
Upper decorative chimney (Inner)
Lower Chimney bracket
Lower decorative chimney (Outer)
• Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall by 2 screws (4×30mm)).
• Fix the upper chimney bracket on the upper chimney by 2 screws (4×8mm). Pull the upper chimney
upwards to the desired height.
Screw the upper chimney bracket on the wall by 2 screws (4×30mm).
For safety reasons, use only the same size of fixing or mounting screws that are recommended in this
instruction manual.
Failure to install the screws or fixing devices in accordance with these instructions may result in
electrical hazards.
