Copyright © 2018, Fast ČR, a. s.
Revision 08/2018
EN - 9
• Lift the hood up and hang it onto the wall bracket.
Cooker hood
Wall bracket
• After hanging the hood on the bracket, remove the grease filters, mark 2 holes inside the hood for safety
screws. After marking, remove the hood, drill two holes and insert 2 wall plugs and finally fix the safety
screws with 2 screws (ST4x30mm).
Wall plug
2 PCS ST 4x30 mm
• When you choose the ducting version, place the exhausting pipe (Ø150-Ø153mm,
s
upplied) on the
hood. The head Ø153mm would connect to the hood.
If you need to use the Ø120-Ø123mm pipe, you can place the adapor(not supplied) fi rstly.
When you choose the fi lter version, no need the exhausting pipe.
