Philco PDT 67 DF, Owner'S Manual

Page: 38 / 180

Copyright © 2020, Fast ČR, a. s. Revision 10/2021
EN - 36
Saving Energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption and is not
recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and water in the use phase
than hand dishwashing when the household dishwasher is used according to the instructions.
Starting A Programme
1. Draw out the basket, load the dishes and push them back.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page “Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the dishwasher will
start its cycle.
Changing The Program Mid-cycle
A programme can only be changed if it has been running only for a short period of time, otherwise the
detergent may have already been released or the the wash water with detergent has already been drained.
If this is the case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds,the machine will be in program selection mode.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 1 seconds, the dishwasher will start.
3 sec