Philco PDC 72 Chiva, Owner'S Manual

Page: 28 / 136

Copyright © 2018, Fast ČR, a. s. Revision 06/2022
EN - 26
5.2.3. Programme Progress
During the Programme
If you open the door when the programme is running, the product will switch to standby mode. Once the
door has been closed, press the Start/Pause key to resume the programme.
Do not open the loading door when the programme is running. If you have to open the door, do not keep it
open for a long time.
Programme End
Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter cleaning and heat
exchanger cleaning will turn on. Additionally, an audible warning will be given at the end of the programme.
You can remove the laundry to make the machine ready for a new load.
IMPORTANT:
Clean the lint filter after every programme. Empty the water tank after every programme.
IMPORTANT:
If you do not take out the laundry after the programme has ended, the 1-hour Anti Crease
phase will automatically be activated. This programme rotates the drum at regular intervals to prevent
creases.
5.3. Drum Light Information
• This product includes LED Drum Light.
• The light works automatically when you open the door. And closes itself after a while automatically.
• It is not an adjustable option for user to open or close it.
Contact the service department for repair or replacement of LED lighting.
Selection Stand By
After 15 minutes without user intervention in selection mode, the appliance switches to energy saving mode
to reduce energy consumption. In this model must blink 0,5 sec ON, 3 sec OFF during energy saving mode.
At the energy saving mode “---” LED luminosity is reduced. The appliance must be restarted by setting the
program selector to “OFF”. Thern you can select any program again.