Copyright © 2018, Fast ČR, a. s.
Revision 06/2022
EN - 15
2. INSTALLATION
2.1. Connection to Water Outlet (with optional drain hose)
In products with a heat pump unit, water accumulates in the water tank during the drying process. You must
empty the accumulated water
after each drying process
. Instead of periodically emptying the water tank,
you can also use the water drain hose provided with the product to directly drain the water outside.
2.1.1. Connecting the Water Discharge Hose
1.
Pull and take out the end of the hose at the back of the dryer. Do not use any tools to take out the hose.
2.
Fit one end of the water discharge hose, which is provided with the product, to the slot from which you
have removed the hose.
3.
Fix the other end of the water discharge hose directly to the water outlet or sink.
ATTENTION:
The hose must be connected in a manner that it cannot be displaced. If the hose comes out
during water discharge, there might be flooding in your house.
IMPORTANT:
The water discharge house must be installed at a height of 80 cm maximum.
IMPORTANT:
The water discharge hose must not be bent between the outlet and the product, folded or
stepped over.
Summary of Contents for PDC 72 Chiva
