Philco PD 1261 BiB, User Manual

Page: 25 / 108

EN - 23
02/2012 Copyright © 2012, Fast ČR, a. s.
Program table
Program Pre-wash Quick
wash
40°C 30
min Gentle
wash Economi-
cal wash ***Super
65°C 50
min Intensive
wash
Temperature 35°C 40°C 40°C 50°C 65°C 65°C
Degree of soiling Low Low Low Medium Medium High
Dishwashing detergent
A: 25 cm³/15 cm³
B: 5 cm³ **B A A A+B A+B A+B
Washing cycle process Pre-wash Wash 40°C Pre-wash Pre-wash Wash 65°C Wash 45°C
End Cold rinse Wash 40°C Wash 50°C Lukewarm
rinse Wash 65°C
Hot rinse Cold rinse Cold rinse Hot rinse Cold rinse
End Hot rinse Hot rinse End Hot rinse
Drying Drying Drying
End End End
Washing cycle time (min) 18 30 73 160 50 113
Electricity consumption
(kW/h) 0.45 0.90 0.95 0.95 1.43 1.64
Water consumption (l) 7.7 12.4 15.7 12.4 12.7 17.2
Half dish load
Washing cycle time (min) 18 30 63 145 46 94
Electricity consumption
(kW/h) 0.45 0.90 0.93 0.98 1.28 1.37
Water consumption (l) 7.7 12.4 11.7 12.1 12.7 12.2
NOTE (*):
It is necessary to refi ll the rinsing aid into the compartment.
** Use only a powder dishwashing detergent.
*** You can wash dishes also by using A in the Super 50 min washing cycle.
Turning on the appliance / starting a washing program
1. Pull out the lower and upper rack, load it with dishes and then slide back in.
We recommend that you fi rst load the lower rack and only then the upper rack (see “Load the dishwasher
racks”).
2. Fill the compartment with dishwashing detergent (see section “Dosage of the dishwashing detergent”).
3. Connect the power plug to the power socket. Power source is 220 - 240 V ~ 50 Hz, power socket specifi cation
12 A, 250 V ~. Check that the water inlet is fully open.
4. Press the ON / OFF button. The Start/Pause indicator light will turn on.
5. Repeatedly press the program button to select the desired program.
6. If necessary select an additional function.
7. Press the Start/Pause button to start the program. The indicator light of the selected program will turn off
when the program is started.