Philco PD-12, Operating Manual

Page: 21 / 24

21
3.Humidity Settings:
Only in normal mode, the horizontal slide effectively;
Humidity can be set between 30% - 80% (5% adjustment factor),
4. Timing:
Buttons can be set into the timing of the state, the time is 1-24 hours;
5. Wind Speed:
The speed key is valid only in normal mode and ventilation mode;
6. Sleep:
After entering sleep mode to run with minimum wind speed.
7. Air clean:
- Press”Air Clean” key,the button indicator lights on
-Start negative ion generator
Humidity color lamp
indoor humidity of less than 50% is low humidity (blue light)
50%<indoor humidity<70% is medium humidity (green light)
Indoor humidity of more than 70% is high humidity (red light)
To prevent the light bar from bouncing back and for that the critical points,there is a 3% error
setting.
Maintenance notices
Warning
Please don't plug in with wet hands to avoid electric shock.
Notice
Please cut off the power supply before daily cleaning and maintenance.
Don't dismantle the floater from the water tank.
If the machine unit is not in use for extended periods:
1. Empty out the water in the tank, wipe up the water tank and install it back.