Philco PD-12, Operating Manual

Page: 20 / 24

20
Preparations and inspection while beginning the operation
Confirm the tank is installed in position
The dehumidifier can’t operate if the water in the tank is full or isn’t installed well.
•
How to move water tank
Hold the water tank sides and pull out
•
Method to empty out the water tank
•
Pull out the water tank from the dehumidifier
•
Incline the water tank according to the indication direction and empty out the water slowly.
•
Install the water tank back into the dehumidifier.
Operation manual
1. Power Button:
This button can control the machine on and off;
2. Dehumidification Mode:
Press to enter the mode selection state, can switch to normal
dehumidification, continuous dehumidification, ventilation mode,
dry clothes mode;
Normal dehumidification: adjustable wind speed and humidity
Continuous dehumidification: low wind, humidity is not adjustable
Ventilation mode: Adjustable wind speed, humidity is not adjustable
Drying mode: default high wind mode, wind speed and humidity are not adjustable