Philco PD 1045 EA, Owner'S Manual

Page: 11 / 130

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 9
Electrical connection
The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and
current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In
case of usage without earthing installed, our company will not be responsible for any loss of usage that might
occur. The plug on this appliance may incorporate 13A fuse depending on the target country.
Your machine is set according to 220-240 V. If the mains voltage in your location is 110 V, connect a transformer
of 110/220 V and 3000 W inbetween. The machine should not be plugged in during positioning.
Always use the coated plug supplied with your machine.
Running in low voltage will cause a decline in washing quality.
The machine’s electrical cable should be replaced by an authorised service or an authorised electrician only.
Failure to do so may lead to accidents.
For safety purposes, always make sure to disconnect the plug when a wash programme is finished.
In order not to cause an electric shock, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the plug. Never pull the cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have sufficient space under your countertop
and whether the wiring-plumbing is suitable to do so. 1 If you decide that the space under the countertop is
suitable for fitting your machine, remove the worktop as shown in the illustration.
2