EN - 8
10/2016
Copyright © 2016, Fast ČR, a. s.
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance
is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the
wall unit must be at least 100 mm. Ideally, however, the appliance should not be positioned below overhang-
ing wall units. Accurate leveling is ensured by one or more adjust-able feet at the base of the cabinet.
WARNING!
It must be possible to disconnect the appliance from the mains power supp-ly; the plug must
therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your do-
mestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth
in compliance with current regulations, consulting a qualifi ed electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the EU Directives.
Space requirement
The folowing are recommend. Clearances around the chest freezer
Sides
10cm
Back
10cm
Top
70cm
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated
on the rating plate of the appliance:
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
