EN - 4
08/2016
Copyright © 2016, Fast ČR, a. s.
PART 3: INSTALLATION
Unpacking your refrigerator-freezer
WARNING:
Use two or more people to move refrigerator-freezer.Failure to do so can result in back or other injury.
Remove tape and any labels from your refrigerator-freezer before using(except the rating label).
To remove any remaining tape or glue, rub the area briskly with your thumb.
Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the
adhesive with your fi ngers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, fl a mmable fl uids, or abrasive cleaners to remove tape or glue.
These products can damage the surface of your refrigerator-freezer.
When moving the refrigerator-freezer, do not tilt the refrigerator-freezer beyond 45°from upright position.
Cleaning before use
After you remove all of the packaging materials, (especially the foam between outside condenser and cabinet
should be removed) clean the inside of your refrigerator-freezer before using it.
Space requirements
This appliance is intended to be used in household
.
WARNING:
Keep fl ammable materials and vapors, such as gasoline, away form refrigerator-freezer. Failure to do so
can result in death, explosion, fi ne or burns.
To ensure proper ventilation for your refrigerator-freezer, allow for 200 mm space on each side between walls,
200 mm space between back of your refrigerator-freezer and the wall, and 300 mm space between counter
top and the roof or ceiling.
If you are installing your refrigerator-freezer next to a fi xed wall, leave suffi
cient space on the hinge side to
allow for the door to swing open.
