QP-10-IM21UL/Rev 12
This manual contains important safety instructions for the PV module that must be
followed during
the maintenance of PV modules. To reduce the risk of electric shock, do not perform any
servicing unless you are qualified to do so.
“PV
equipment on the DC side shall be considered to be energized, even when the
system is disconnected from AC side and isolated from PV
Inverter”, “PV
modules will
be producing dangerous levels of voltages and current».
1.
The installation must be performed by a certified installer/servicer.
2.
The installation is only allowed after referring and understanding of Installation on
manual.
3.
Installation and commissioning shall be done in accordance with IEC 62446 &
IEC60346 and their associated codes.
4.
Do not pull the PV cables.
5.
Protect PV Modules cables from direct sunlight.
6.
Do not strain junction box conductors.
7.
Do not touch any surface of module.
8.
Do not place/drop objects onto the PV module.
9.
Do not disassemble or attempt to repair the PV module by yourself.
10.
Do not damage, pull, bend or place heavy material on c ab l e s .
11.
Do not use stainless wire ties or any other sharp material to tight the PV Modules
cables directly.
12.
Protect PV Cables from Pests and small animals is essential.
13.
Upon completion of any service or repairs, ask the installer /servicer to perform
routine checks to determine that the PV modules are in safe and proper operating
condition.
14.
When replacement parts are required, be sure the installer /servicer uses parts
specified by the manufacturer with same characteristics as the original parts
unauthorized substitutions may result in fire, electric shock or another hazard.
15.
Consult your local building and safety department for required permits and
applicable regulations.
Summary of Contents for PS-M60 Series
Page 1: ...Installation...
