CAB-27/CAB-47 OWNER’S MANUAL
Thank you for purchasing PJB Speakers Cabinet. A great deal of dedication and passion went into designing and building
this no-compromise, high performance loudspeaker system. These are dedicated loudspeakers for the “connoisseur”
bassist. Reading this manual will enable you to get the best performance from them, and ensure that they give you many
years of service.
Read This First
Before using the cabinets,
please read ALL the instructions.
On receipt of product, check for any signs of physical damage arising from shipping. If any damage is visible contact
your dealer as soon as possible.
Never use this product in the vicinity of water.
Never connect more than one amplifier to a speaker!
Do not use speaker at maximum volume for an extended period of time.
Do not locate this speaker near any heat source.
Do not let liquid or any foreign objects fall into any openings of the speaker.
Do not use this speaker if it has:
1. Suffered by considerable physical damage.
2. Been subjected to any liquids, rain or moisture.
Speaker Cabinet Specifications
Model
Speaker
Impedance
Frequency
Ranges
Maximum
Power
Handing
Dimensions
WxDxH
Weight
Cab-27
1x3”Tweeter
2x7”PJB Woofers
8Ω
30Hz~15kHz
200 W
16.3x12.6x13 inch
415x320x330 mm
29 Pounds
13.1 kg
Cab-47
1x3”Tweeter
4x7”PJB Woofers
8Ω
30Hz~15kHz
300 W
16.3x12.6x17 inch
415x320x430 mm
38.6 Pounds
17.5 kg
Connecting Up Your Speakers
All PJB speakers feature genuine
Neutrik
NL4MP SPEAKON
, airtight loudspeaker sockets featuring low resistance silver
contacts. They have a current rating of 40 amps, making them the ideal bass instrument speaker connection. Using both
the 2 positive and 2 negative connections in parallel results in each PJB speaker connection capable of handling peaks of up
to 80 amps!
The two Speakons on the rear recess plate allow parallel-connected speakers to your amplifier. Just plug your amplifier into
the input socket, and then connect your other speaker to the link out socket. If you are using two speakers connected to
your amplifier, a better way is connecting each speaker directly to your amp's output-sockets. This will
give a lower cable resistance, improving sound quality.
