Phil & Teds Capsule Base, Manual, Page: 19 / 176

Instructions
5d Align the top and bottom buckle clips to form
one clip.
5e Insert into the buckle until you hear a “click”. Make sure the
shoulder straps are not twisted. Adjust the shoulder pads
over the centre of the child’s shoulders.
5f Pull the harness adjustment strap until shoulder straps are
tight against the child.
5g For proper tightness, one finger should fit between the
harness straps and the child’s shoulders.
To remove the child, loosen shoulder straps and release
buckle.
Discontinue use when child’s weight > 13kg, height >74cm
or head is less than 2cm above the top of the shell.
SECURING THE CHILD IN CHILD RESTRAINT
5a Press the adjuster button on the front center of the seat,
and pull on both shoulder straps to loosen the harness.
5b Press the red button on the buckle to release the
shoulder straps and move them to the side.
5c Place child’s bottom on the seat and the child’s back
flat against the back of the child restraint. This will
increase the child’s comfort and allow the harness to
properly secure the child. Slide shoulder straps over the
child’s shoulders (5c). Make sure the harness is at or
below the top of the child’s shoulders.
5d
5e
5f
5g